Double Diaphragm Pump Fullflow 502 For Sewage Engineering 530 l/min

Debem Fullflow 502 pneumatic double diaphragm pump with clapet circuit and maximum flow rate of 530 l/min. Suitable for the transfer of highly viscous fluids, which may also contain suspended solids up to 45 mm diameter. The pump can therefore be used ideally for sewage engineering and water treatment industry. Debem's robust and extremely low-maintenance diaphragm pumps are designed to high standards and are suitable for continuous use.

Features Fullflow 502 Double diaphragm pump:

• Max flow rate*: 530 l/min*
• Suction/delivery connections: G 2 1/2" f BSPP
• Air fitting: 1/2" f BSPP
• Max head*: 40 m
• Max supply air pressure: 4 bar
• Max negative suction head - dry running**: 3.5 m
• Max diameter suspended solids: 45 mm
• Max. particle length: 600 mm
• Weight: 38 kg

*The curves and performances refer to pumps with immersed suction and free delivery port, with water at 20°C and vary according to the materials of composition.

Advantages

• PATENTED stall-prevention pneumatic circuit
• Polypropylene body
• the pump continues to run without blocking in case of pressure imbalances.
• Clapet in EPDM and NBR and natural rubber, core in AISI 316 always in contact with fluid
• Operated with NOT lubricated air
• Self-priming
• no additional manual priming device required
• Dry running capability
• the pump can run dry without being damaged
• Possibility to adjust the operating speed
• Suitable for handling liquids with high viscosity and for heavy duty applications
• Capable of pumping liquids with suspended solids (up to 45 mm diameter)
• Low maintenance and durable diaphragm
• Dual suction and discharge

Applications

• Water treatment industry
• Ceramic, Stone, Marble, Glass and Mininig industry
• Galvanic and electronic industry/li>
• Textile and leather industry/li>
• Packing, glue, paper ans paper mills

When ordering, please state the code according to the following code encryption table.