ร้านออนไลน์สำหรับลูกค้าที่มีธุรกิจ
Blue Epoxy Systems For In-House and Lateral Systems

Blue Epoxy Systems For In-House and Lateral Systems

  • 1064415
€327.60*
Content: 18.2 Kilogram (€18.00* / 1 Kilogram)

Prices plus VAT plus shipping costs

Partly in stock

Type:

Sanikom epoxy resin bundle for in-house and mainline  rehabilitation ,  hardens very...more
Product information Blue Epoxy Systems For In-House and Lateral Systems

Sanikom epoxy resin bundle for in-house and mainline rehabilitationhardens very quickly. Epoxy resin system for the house and house connection area, consisting of epoxy resin and hardener. In combination with pipe liners or a felt hat it creates a robust material for sewer pipes. Blue colored product for easier control during processing and for visibility in the pipe. Very pleasant to process due to its slightly thicker consistency. Due to its special flow properties, it also adheres excellently to the fabric. Very fast curing times compared to other products in the same price category! Price per bundle.

 

There are 5 different epoxy systems to choose from (for properties, see Technical Data):

 

EXRR-2 (Bundle 14 kg + 4,2 kg) and EXR-2  (Bundle 14 kg + 3,92 kg)

- medium viscosity

- cure very quickly at room temperature

- suitable for cold regions such as Scandinavia as they react down to 5 degrees Celsius

- high mechanical and chemical resistance as well as temperature resistance even when cured in the room

- hardeners from both systems can also be used in combination with SANIKOM thick epoxy resin so that they do not run into the lateral or internal connection.

 

EX1-2 and EX2-2  (Bundle each 14 kg + 3,5 kg)

- Medium viscosity

- Fast curing

- Suitable for short to medium installation lengths

- High mechanical and chemical resistance as well as temperature resistance even with room curing

- Hardeners from both systems can also be used in combination with SANIKOM thick epoxy resin so that they do not run into the side or in-house connection.

 

EX4-2  (Bundle 14 kg + 2,8 kg)

- Excellent reactive system with low viscosity and a good ratio between processing and curing time

- suitable for short to medium installation lengths

- high mechanical and chemical resistance as well as temperature resistance when the epoxy system is cured at a temperature of 50-80 degrees Celsius.

 

WARNING

Processing epoxy resins poses health risks. Please wear your PPE and be sure to follow the instructions in the respective safety data sheet! If you have any questions about sewer renovation with epoxy resin, please contact our customer service.

We recommend for this product:
Sanikom Silicon Bladers Inhouse...
From €291.50*
Sanikom Silicon Bladers / T-Blader Inhouse Repair System , used...
Inflatable Rubber Plugs for T-Packers
From €459.80*
Inflatable rubber plugs for T-packers from Sanikom. Available in 5...
Impregnation Table Extension DN 300...
From €1,597.20*
Impregnation Table Extension DN 300 Length 1-2m.   ...
Inversion Fitting 6" With Storz...
From €387.20*
Inversion Fitting 6" With Storz Coupling 50 - 250 mm
Circum LEM Liner End Sleeve With DIBt...
From €184.80*
The Circum LEM liner end sleeve with DIBt approval (German...
ASCOPA Rehabilitation Hose DN 800 -...
From €222.20*
Ascopa rehabilitation hose for large and small diameters ....
Viewed

* ราคาไม่รวมภาษีมูลค่าเพิ่ม ค่าบรรจุหีบห่อ และค่าส่ง