ร้านออนไลน์สำหรับลูกค้าที่มีธุรกิจ

Abrasive belt guide SPIDER for finishing workpieces

  • 23-22-01
€643.50* €850.00* (24.29% Saved)

Prices plus VAT plus shipping costs

In stock or available at short notice.

Model:

CE
Our safety belt sander for lathes "Spider" for the finishing of workpieces ensures safety. Most...more
Product information "Abrasive belt guide SPIDER for finishing workpieces"

Our safety belt sander for lathes "Spider" for the finishing of workpieces ensures safety. Most accidents on lathes occur during regrinding, polishing and removal of burrs. Designed according to DIN EN 23125 standards 6.2.1 (no use of hands during working operations), your hands no longer come close to rotating machine parts.

Simple mounting 

The grinding belt holder Spider is quickly mounted on the tool holder of the lathe and is immediately ready for use. The grinding belt guide is pressed against the workpiece with the carriage, the hands of the operator are far away from danger points. A manually operated crank allows the abrasive belt to be turned further when worn. This also happens outside the danger zones.

Note: the crank shown in the pictures only serves to transport the worn abrasive belt. The actual work is "done" by the tool slide.

Work Facilitation

By using the spider, you achieve a consistent sanding result. Depending on how close the tool slide comes to the workpiece, a uniform pressure is exerted on the workpiece to be machined. This is a tremendous improvement over the conventional and more dangerous manual method.  

Spare part: Abrasive belts 

Different belts (grain size, material) can be used according to your requirements. The belt can be changed quickly and easily: lift the lower tensioning spring, the abrasive belt relaxes and can be changed.

 

Scope of delivery:

Abrasive belt guide SPIDER in selected size, 3 abrasive belts in various grit sizes (grit 80 - 120 - 220), installation instructions, CE declaration of conformity

use on: turning machines
material: steel
Montage: on the tool slide
Use on lathes Use on lathes Weight Approx. 2 kg Weight Approx. 2... mehr

Use on lathes

Use on lathes

Weight Approx. 2 kg

Weight Approx. 2 kg

Lighting No

Lighting No

Conformity according to manufacturer DIN EN23125 standards 6.2.1

Conformity according to manufacturer DIN EN23125 standards 6.2.1

Your order will be shipped to the address of your choice. Further information on our shipping... mehr

Your order will be shipped to the address of your choice.

Further information on our shipping costs can be found under "Shipping and Packaging".

In the order process you will also see the shipping costs for your order, which are calculated according to weight and volume.

We recommend for this product:
Wood Pad
From €156.00*
WOOD-PAD Floor Platform System ? comfortable, stable and safe...
Spare part: Sanding belt for SPIDER
From €8.00*
Abrasive belt as spare part for our abrasive belt holders SPIDER50...
CLIK LED machine light 12W
From €204.00*
The powerful LED machine lamps of the Clik series provide bright,...
Mobile hygiene protection
€109.00*
  Mobile hygiene protection with two stable feet ...
Emergency-stop pushbutton with...
€278.00*
Emergency stop boxes, suitable for a load up to 2.2 kW 3 phases or...
Safety wooden grating - 2 row nitrile...
From €82.50*
Your new floor covering as a replacement for conventional work...
Safety wooden grating - 3 row nitrile...
From €211.20*
Your new floor covering as a replacement for conventional work...
System partition wall for...
€441.00*
System partition wall for workstations 890 x 1300 mm wide x high,...
CLIK LED machine light 12W
From €204.00*
The powerful LED machine lamps of the Clik series provide bright,...
CLIK COB machine light 240V 20W
From €256.00*
The powerful LED machine lamp of the Clik Cob series is the new...
Viewed

* ราคาไม่รวมภาษีมูลค่าเพิ่ม ค่าบรรจุหีบห่อ และค่าส่ง

Top