T-Felt-Liner With PU Coating 3,3 mm

Sanikom T-profile liner / T-Felt Liner 3.3 mm with PU coating for house connection repair. Available in different sizes, see Technical details. Dimensions of the T-profile liner: 50 cm / 25 cm (see illustration). 

T- Felt Liner Impregnation
- Mixing the resin and impregnating the T-liner
- The resin must be mixed in the correct ratio
- The resin must be mixed for 3 minutes
- Pour the resin onto the liner and massage it deep into the structure of the
T-Liner. Check the complete impregnation by looking into the T-liner
- Impregnation (impregnation) without white spots

Fill the packer with T-Liner
- Push silicone packer side connector into packer and place packer under vacuum
place
- Pull T-Liner over packer (positioning over inverted side port)
- Invert the packer side port out with light pressure
- Reduce packer pressure to invert the side port including the T-liner
into the packer (without folding).
- Put the packer under vacuum
- Fix the T-Liner with crepe tape

Please note: The side connector should be pushed into the packer against the direction of installation.

We recommend the use of the following epoxy resin systems:

- Sani EXRR-2 (order number 1064415)
- Sani EXR-2 (order number 1064416)