Pair of Roll Blinders AR for Lathe Lead Screw, Closed Housing

Robust cover for guide and feed spindles to protect against any sources of danger. Two-piece cover with closed housing. With our protective device set AR you get a heavy, industrial-suited cover for guide and pull spindles. The two roller blinds (each for mounting to the right and left of the tool slide) are made of high-strength, heat-resistant aramid fibres. The roller and spring mechanism of the blind holder is enclosed in a welded steel box.

When the tape retracts onto the roller mechanism inside the steel box, any chips that may have settled on the lid are wiped away to prevent damage to the internal components.

The protection is available in different lengths and heights to suit every lathe. Larger covers are also available, e.g. 7,000 or 8,000 mm long. Prices available on request.

Measure for the correct size, height and width of the lathe bed.

Instructions for correct dimensioning can be found here.

>> Attention: If the model is too small, the protective mechanism may otherwise be damaged if the carriage is moved too far to the left or right.

Scope of delivery:

Protection device in selected size, consisting of pair of roller blinds with spring and blind holder as well as sturdy metal boxes, installation instructions, CE declaration of conformity.