LED Signal Lights & Hybrid Lights
In addition to white light illumination, LED signal lights and hybrid lights also ensure safer and more efficient processes by switching to a colored light. Integrated into the PLC control system of the machine or system, they communicate standstill or malfunction (red) and normal operation (green), among other things, through this optical color display. With their RGB LEDs, the signal lamps thus realize a simple form of intelligent light - ideal for retrofitting machines or for series production plants. Our LED signal lamps offer a wide range of options for signaling machine and system statuses. In addition, depending on the luminaire, efficient, daylight white SMD LEDs.
Fields of application: Machines, production plants & assembly lines
SIGNALED II_RGB LED Signal Luminaire 180 - 1520 mm, 120 °, 24V DC
SIGNALLED II RGB - Slim LED signal light with uniformly colored light over the entire illuminated area. With its protection class IP54, the signal light is suitable for machines and systems without chip bombardment or KSS - a cover made of polycarbonate protects the light from splash water and dust. The SIGNALLED II RGB is visible from afar thanks to its colored light and is therefore ideal for security areas. Depending on the control and the desired signal effect, all RGB color tones can be generated and changed. Brackets for attaching the machine light are included. Advantages: Colored light: bright and flicker-free Signal colors show the status of machines, systems or infrastructures All colors from the RGB color spectrum can be selected for signaling Areas of application: Metal processing: As a signal function for machines and systems Bending machines Automatic punching machines Work in automation Maintenance and infrastructure Logistics and clean room signaling Features: Bright RGB LED chips Color changes can signal different states of machines and systems Red, green, Blue: Mixed colors are generated by simultaneous control of connection PINs White can be used as a mixed color Control of the LED chips by the PLC control of the machine or system Beam angle 120 ° Opal white Cover unbreakable and splinter-free, protection against moisture and dust Very narrow and slender luminaire body Heat is dissipated to the rear via an aluminum base LED service life> 60,000h (L80 / B10 ) Protection class IP54 - for machines and systems without chip bombardment or KSS and with little space Direct connection voltage 24V DC via M12 A-coded plug connector Fastening via Supplied mounting brackets Maintenance-free, 36 months warranty Made in Germany Versions: New: now 7 lengths: 180 mm, 260 mm, 350 mm, 520 mm, 760 mm, 1020 mm, 1520 mm Installation options: 2 pairs of supplied lamp holders for fixed or movable mounting or optional mounting accessories
TUBELED_40 II_RGB-W LED Light with Signal Function 280 - 1540 mm, 100 °, 24V DC
TUBELED_40 II RGB-W - LED machine light with signal function. Contains white LED chips for optimal illumination and RGB LED chips for color changes. Due to its compact design with a diameter of only 40 mm, the luminaire can also be used in confined spaces. The freely definable colors of the machine light can be used to signal different states of machines and systems through color changes, also as a flashing or flashing interval. The TUBELED_40 II RGB-W is also a very robust luminaire with a high degree of protection IP67 / IP69K, chip-proof, oil- and coolant-resistant. Advantages: Flicker-free, homogeneous lighting without UV - and IR component and signal function via freely definable colors or flashing or flashing intervals Optimal lighting through 100 ° surface light Easy to upgrade or retrofit Oil - and coolant resistant, chip bulletproof Areas of application: Machine tools and CNC machines Injection molding machines Automatic punching machines Production and manufacturing areas with little space Logistics and automation Features: RGB-LED -Chips and high-performance LED chips for white light in a luminaire Beam angle 100 ° and color rendering Ra> 85 for daylight white 5200-5700K RGB LED chips can have different states of machines and Signal systems by changing colors Control of the LED chips through the PLC control of a machine or system crack-proof 4mm tempered glass light-forming technology space-saving geometry heat dissipation to the rear via aluminum profile 4 lengths: 280 mm, 540 mm, 1040 mm, 1540 mm Protection class IP67 / IP69K and service life> 60,000h (L80 / B10) CNC- suitable CE and ETL listed Maintenance-free, 36 months warranty Made in Germany Versions: 4 lengths each: 280 mm, 540 mm, 1040 mm, 1540 mm 2 versions: luminous flux-optimized power versions and performance-optimized ECO versions
UNILED SL RGB-W LED System Light with Signal Function 295 - 1545 mm, 100 °, 24V DC
The LED system light UNILED SL RGB-W with signal function is a powerful system light which, in addition to balanced lighting, also offers a signal function for changing the light color or by flashing. The opal white glare control creates a homogeneous, glare-free and shadow-free illumination with a strong light output at the same time. Changes in status in the work area can be signaled by a color change, for example to green or red light or by intermittent flashing. Advantages: Homogeneous, low-shadow, glare-free illumination without UV and IR components Pleasant atmosphere thanks to daylight white 52005700K and signal function via different colors The white light reproduces colors and contrast values very well Opal white glare control for glare-free illumination Signaling via change of light color or intermittent flashing Integrated fastening straps Areas of application: Optical control workstations System workplaces Test and laboratory workplaces Color and lacquer tests Can be used in machines without coolant and chip bombardment Features: Robust aluminum housing with integrated fastening for horizontal use High-performance LED cluster with s Separate LED chips for white light and RGB Optionally also pivotable with wall or joint angles Bright illumination of system workstations and work areas with 5200-5700 K daylight white cover with opal white glare control Beam angle 100 ° and color rendering Ra> 85 in daylight white Signaling via change of light color - all colors of the RGB color space can be selected Protection class IP 50 and above-average service life> 60,000h (L80 / B10) Heat is dissipated to the rear via an aluminum base Connection voltage 24V DC via standardized M12 plug connection CE - and ETL listed seal of approval Maintenance-free, 36 months warranty Made in Germany Versions: Four different Lengths: 295 mm, 545 mm, 1045 mm, 1545 mm Different light intensities Opal white glare control
INROLED_50_RGB-W_Ecolab LED Tube Luminaire with Signal Function, 50 mm Ø, 305 - 1065 mm, 100 °, 24V DC
The INROLED_50 ECOLAB RGB-W LED signal light with Ecolab coating is a bright, homogeneous tube light with a diameter of 50 mm, a high degree of protection and a signal function. The LED luminaire has a crystal-clear, shatterproof housing made of polycarbonate, which completely seals off the body of the luminaire from the outside and is ideal for illuminating hygiene-sensitive areas such as those found in the food, pharmaceutical and packaging industries as well as logistics. Advantages: Illumination and signaling via RGB color change in an LED lamp Flicker-free, bright and homogeneous illumination with white light without UV and IR components Signal function via RGB colors - the polycarbonate housing is then fully illuminated Completely encased by a protective tube with dirt-repellent Ecolab coating No interfering or dirty edges on the housing Resistant to hydrogen peroxide (H? O ?, max. 35%), acids and alkalis (individual check) Easy to assemble and change Areas of application: Food & Beverage Systems in the packaging industry Pharma industry Logistics workstations Assembly lines Features: White light and RGB LED clusters Beam angle 100 ° and color rendering Ra> 80 with daylight white 5200-5700K RGB LED chips can signal different states of work areas by changing colors Controlling the LED chips the PLC control of a machine or system Opal white and Ecolab coated protective tube made of polycarbonate - fully illuminated Light-Reflection-Technology Use in ambient temperatures of -30 ° C to + 55 ° CC (with color mixing max. + 35 ° C) Tube luminaire geometry Ø50 mm Impact resistance IK09 Heat dissipation via internal aluminum profile back 3 lengths: 305 mm, 565 mm, 1065 mm Protection class IP67 / IP69K and service life> 60,000h (L80 / B10) CE - and ETL listed seal of approval Connection voltage 24V DC via cast M12 connector made of stainless steel (F&B suitable) Fastening via the supplied lamp holder made of metal detectable PP or optional brackets Maintenance-free, 36 months warranty Made in Germany
TUBELED_40 II Integrated_RGB-W Recessed Luminaire with Color Change, Standard Dimensions, 100 °, 24V DC
TUBELED_40 II Integrated RGB-W - LED recessed luminaire with signal function. Flat recessed luminaire in standard dimensions with white and RGB LED chips for color changes in one luminaire. Suitable for tight and rough conditions such as chip bombardment or moisture from coolants and lubricants. With the TUBELED_40 II Integrated RGB-W, such and other production areas can be well illuminated and changes in the status of machines or systems can be signaled in color. Advantages: Recessed luminaire in standard dimensions - only flat Flicker-free, homogeneous lighting without UV and IR components and signal function via freely definable colors or flashing or flashing intervals Optimal lighting through 100 ° surface light Oil - and KSS-resistant, chip-proof Easy to upgrade or retrofit in standardized installation shafts or for self-installation Areas of application: Tool and CNC machines Injection molding machines Automatic punching machines Eroding machines Production and manufacturing areas with little space Logistics and automation Features: RGB LED chip and high-performance LED chip cluster for white light and colored light in one luminaire Beam angle 100 ° and F. Color rendering Ra> 85 with daylight white 5200-5700K RGB LED chips can signal different states of machines and systems by changing colors Control of the LED chips by the PLC control of a machine or System Crack-proof 4mm ESG Light-Forming-Technology Space-saving geometry Heat dissipation to the rear via aluminum profile Various lengths and widths Protection class IP67 / IP69K CNC-suitable Maintenance-free, 36 months warranty Made in Germany Versions: Various dimensions: 395x74x3 mm, 570x74x3 mm, 740x74x3 mm, 340x78x3 mm, 700x78x3 mm