LED Built-In Lights
LED recessed luminaires provide uniform, flicker-free, and glare-free illumination in the machine compartments of machine tools. Depending on the design, they are installed in the machine housing or as flush-mounted fixtures.
This minimizes disruptive edges and helps prevent the accumulation of chips or similar debris. As a result, they are also perfectly suited for use in the food industry as well as in camera-assisted quality monitoring.
LED recessed luminaires are ideal for very tight installation spaces, even in close proximity to the workpiece. They can be connected directly to the machine’s power supply.
Application areas: machines, production systems and assembly lines, vision systems, vehicle construction.
SPOTLED II Recessed Luminaire 16 ° - 40 ° Beam Angle, 8.5W, 24V DC
LED recessed luminaire SPOTLED II RECESSED - LED machine luminaire for point or area light. Universally applicable recessed luminaire with daylight white 5200-5700K, which can be used as a spotlight or wide-beam area light. When mounted recessed, the SPOTLED II only builds up minimally on the surface. This means that the machine lamp can be used in any desired installation situation. Advantages: Pointed or flat, flicker-free light without UV and IR components Oil-resistant LED lamp and chip bulletproof: made for rough production environments Installation in standard recess diameter 70 mm low installation depth and only 4 mm surface structure No tension star formation Areas of application: CNC and machine tools For camera-supported quality assurance during processing For serial use and for Retrofitting in machines Features: High-performance LED chips for daylight white 5200-5700 K Variants with 3 different beam angles: 16 °, 25 ° or 40 ° and color rendering Ra> 80 4 mm ESG cover, oil-resistant and chip-proof Aluminum base body for heat dissipation to the rear Protection class IP 67 and lifetime> 50.0 00h (L80 / B10) Connection voltage 24V DC via M12 connector on the back FKM seal (Viton®) included in delivery Maintenance-free, 36 months warranty Made in Germany Versions: 3 variants with different beam angles: Spot 16 °, Medium 25 ° and Wide 40 °
TUBELED_40 II Integrated LED Recessed Luminaire IP67-IP69K, 5200-5700K, 220-745 mm, 24V DC
LED recessed luminaire TUBELED_40 II INTEGRATED - proven LED machine luminaire in the built-in version, suitable for all common installation shafts in machine tools. The integrated recessed luminaire has protection class IP67 / IP69K. It is made for harsh production environments and impresses with its enormous amount of light power and high light output. The emitted 100 ° area light is amplified with light forming technology in the direction where it is needed. The TUBELED_40 II Integrated recessed luminaire is 100% CNC suitable, because the built-in version of the TUBELED_40 II, with its robust housing and safety glass, is resistant to chip bombardment as well as coolants and lubricants. Advantages: Bright and flicker-free illumination, without UV and IR components Generous lighting through 100 ° surface light Space-saving geometry: fits into common installation slots Easy and quick retrofitting of Machines High degree of protection IP67 / IP69K ON / OFF interface: load-free switching, flashing, flashing and dimming possible Areas of application : Machine tools Woodworking machines Packaging machines Injection molding machines Features: High-performance LED chips for daylight white 5200-5700 K Luminous flux-optimized light yield and flicker-free illumination without UV and IR components Beam angle 100 ° and good color rendering abe Ra> 85 Crack-proof, 4 mm thick ESG with opal white glare control Protection class IP67 / IP69K and above-average service life> 60,000h (L80 / B10) More direct Connection to machine or system voltage 24V DC via M12 plug connections Chip bulletproof, vibration and shock resistant - 100% CNC suitable Recessed luminaire for recess, sealed and screwed over cover Oil-resistant, sprayed-on seals Light Forming Technology for light guidance Heat dissipation via the rear profile - no burning in of coolants and lubricants CE and ETL listed test seals Maintenance-free, 36 months warranty Made in Germany Versions: Panel width 74 mm in 4 Lengths: 220 mm, 395 mm, 570 mm, 745 mm Panel width 78 mm in 2 lengths: 340 mm, 700 mm All variants are only 3 mm thick when installed
FIELDLED EVO Recessed Luminaire 5200-5700K, 280-1040 mm, 100 °, 19-78W, 24V DC
Recessed luminaire FIELDLED EVO EINBAU - bright LED luminaire for installation in the standardized installation shafts of machines and production systems. Very robust machine lamp with high light output and flicker-free light without UV and IR components. Developed for harsh production environments - oil, water, swarf, coolant and emulsions cannot harm it. The frosted ESG is firmly bonded to the aluminum housing. The supplied FKM seal (Viton®) ensures the tightness between the LED built-in light and the machine housing. Indestructible in perfection. Advantages: Wide-beam, homogeneous illumination, flicker-free without UV and IR components Light emission over the entire luminaire width of the frosted hard glass Easy installation in standardized shafts of machine tools Oil-resistant, chip-bullet-proof and very high protection class No accumulation of chips on and on the luminaire Permanent light output, since no oil or cooling lubricant burns into the glass Areas of application: Large-volume systems and machines CNC and machine tools Milling machines and surface grinding machines Features: High-performance LED chips for daylight white 5200-5700 K Beam angle 100 ° and color rendering Ra> 85 Compact LED equipment inside - extremely powerful 5 mm thick, frosted tempered glass Light-Forming Technology Flat installation; Fastening via M6 countersunk head screws Use in ambient temperatures: -30 ° C to + 60 ° C Heat dissipation to the rear via aluminum body Highest degree of protection IPX9K and above-average service life> 60,000h (L80 / B10) Connection voltage 24V DC; Connection via M12 plug connection on the back CE and ETL listed safety test seal FKM seal for sealing between luminaire and machine included in delivery Maintenance-free, 36 months warranty Developed and manufactured in Germany Versions: 4 lengths each available: 280, 540, 790, 1040 mm Installation in standard light shaft and fastening using M6 countersunk screws, FKM seal included.