Cleaning Pig LM with Plastic Spikes and Slats, Partially Coated, Medium-Solid, DN 80 - 800 mm, against Sand and Mud.

Type LM cleaning pig with plastic spikes, partially coated, made of high-density polyurethane foam, reinforced by a waterproof base plate, also made of polyurethane.

This cleaning pig is partially coated and has slats all around. The pig is held in the middle of the pipe by its slats, which results in gentle cleaning. Sand and mud in particular can be cleaned very well with this pig. The pig pushes the rubbish ahead of it. Other muddy emulsions, such as paint or oil in the pipe, can also be cleaned very well.

When ordering, you should allow for a size tolerance of +/- 2% of the pig size that these pigs may have as they are manufactured manually. This is a quality product Made in Germany!

Features

• The cleaning pig passes effortlessly through 1.5 D pipe bends.
• Diameter reductions of approx. 5 - 10% are possible
• Density: 150-170 kg/m³
• Hardness Shore A: 70
• Fitting narrowing: yes (conditionally)
• Suitable for all pipelines (steel, cast iron, plastic)
• For pigging with water and air

Areas of application:

• For muddy and pasty deposits
• Change of nominal diameter
• Transmitter chamber from DN150 with surcharge
• Particularly gentle on pipes

Type LM cleaning pigs are available in various sizes from DN 80 - 800 mm (correspond to the inner diameter of the pipeline) and lengths from 140 - 1500 mm. We will be happy to provide you with further sizes and lengths of these cleaning pigs upon request!