Cleaning Pig SW-UB - Sponge Pig Uncoated, Soft - DN 50 to 1200 mm

Cleaning pig of the SW-UB type - sponge pig made of high-density polyurethane foam, reinforced by a waterproof base plate, also made of polyurethane. It can also be delivered with a coated head upon request (at an additional cost).

These sponge pigs are uncoated and have a waterproof base plate. They can be squeezed very tightly, almost like a sponge in the bathtub. They also soak up water like a sponge. They are particularly suitable for lighter dirt.

When ordering, you should allow for a size tolerance of +/- 2% of the pig size that these pigs may have as they are manufactured manually. This is a quality product Made in Germany!

Features

• The cleaning pig passes effortlessly through 1.5 D pipe bends.
• Possible diameter reduction max. 15%
• Density: 20-25 kg/m³
• Hardness Shore A: 70
• Fitting constriction: yes
• Please always buy the pig approx. 1-1.5% larger than your pipe inner diameter
• Suitable for all pipelines (steel, cast iron, plastic)
• For pigging with water and air

Areas of application:

• for drying, emptying, disinfecting (use an oversized pig and fill the water column with disinfectant material), venting
• For softer deposits and light contamination (such as dust)
• Remove dust
• Fine cleaning
• Change of nominal diameter (dimension jumps are possible depending on the individual case)
• Chemical applications would have to be examined individually

Type SW-UB cleaning pigs are available in various sizes from DN 50 - 1200 mm (correspond to the inner diameter of the pipeline) and lengths from 120 - 1700 mm. We will be happy to provide you with further sizes and lengths of these cleaning pigs upon request!