Setting Brackets (4 pieces) for Fixing and Adjusting of Drilling Machines Protective Devices & Screen

Height-adjustable stable accident protection device on drilling machines with Polycarbonate screen. This interlocked drill guard is the optimum protection for your drilling machine. You have the choice between 1 and 2 screens made of highly resistant polycarbonate. If required, the protective device is also available without microswitch. When the locked protective guard moves, the IP67 microswitch opens and sends a stop signal to the machine control. This prevents the machine from running when the drill guard shield is open. To adapt the position of the protective screen quickly and easily to your conditions, we recommend our KSP bracket set.

These two brackets help to better center and adjust the attachment to drilling machine guards. In the illustration these angles are marked KSP1 and KSP2.

These two angles help to better center and adjust the protective shield on drilling machine guards. In the illustration these angles are marked KSP3 and KSP4.

The LED system light UNILED SL RGB-W with signal function is a powerful system light which, in addition to balanced lighting, also offers a signal function for changing the light color or by flashing. The opal white glare control creates a homogeneous, glare-free and shadow-free illumination with a strong light output at the same time. Changes in status in the work area can be signaled by a color change, for example to green or red light or by intermittent flashing. Advantages: Homogeneous, low-shadow, glare-free illumination without UV and IR components Pleasant atmosphere thanks to daylight white 52005700K and signal function via different colors The white light reproduces colors and contrast values very well Opal white glare control for glare-free illumination Signaling via change of light color or intermittent flashing Integrated fastening straps Areas of application: Optical control workstations System workplaces Test and laboratory workplaces Color and lacquer tests Can be used in machines without coolant and chip bombardment Features: Robust aluminum housing with integrated fastening for horizontal use High-performance LED cluster with s Separate LED chips for white light and RGB Optionally also pivotable with wall or joint angles Bright illumination of system workstations and work areas with 5200-5700 K daylight white cover with opal white glare control Beam angle 100 ° and color rendering Ra> 85 in daylight white Signaling via change of light color - all colors of the RGB color space can be selected Protection class IP 50 and above-average service life> 60,000h (L80 / B10) Heat is dissipated to the rear via an aluminum base Connection voltage 24V DC via standardized M12 plug connection CE - and ETL listed seal of approval Maintenance-free, 36 months warranty Made in Germany Versions: Four different Lengths: 295 mm, 545 mm, 1045 mm, 1545 mm Different light intensities Opal white glare control

LED recessed luminaire TUBELED_40 II INTEGRATED - proven LED machine luminaire in the built-in version, suitable for all common installation shafts in machine tools. The integrated recessed luminaire has protection class IP67 / IP69K. It is made for harsh production environments and impresses with its enormous amount of light power and high light output. The emitted 100 ° area light is amplified with light forming technology in the direction where it is needed. The TUBELED_40 II Integrated recessed luminaire is 100% CNC suitable, because the built-in version of the TUBELED_40 II, with its robust housing and safety glass, is resistant to chip bombardment as well as coolants and lubricants.  Advantages: Bright and flicker-free illumination, without UV and IR components Generous lighting through 100 ° surface light Space-saving geometry: fits into common installation slots Easy and quick retrofitting of Machines High degree of protection IP67 / IP69K ON / OFF interface: load-free switching, flashing, flashing and dimming possible  Areas of application : Machine tools Woodworking machines Packaging machines Injection molding machines  Features: High-performance LED chips for daylight white 5200-5700 K Luminous flux-optimized light yield and flicker-free illumination without UV and IR components Beam angle 100 ° and good color rendering abe Ra> 85 Crack-proof, 4 mm thick ESG with opal white glare control Protection class IP67 / IP69K and above-average service life> 60,000h (L80 / B10) More direct Connection to machine or system voltage 24V DC via M12 plug connections Chip bulletproof, vibration and shock resistant - 100% CNC suitable Recessed luminaire for recess, sealed and screwed over cover Oil-resistant, sprayed-on seals Light Forming Technology for light guidance Heat dissipation via the rear profile - no burning in of coolants and lubricants CE and ETL listed test seals Maintenance-free, 36 months warranty Made in Germany  Versions: Panel width 74 mm in 4 Lengths: 220 mm, 395 mm, 570 mm, 745 mm Panel width 78 mm in 2 lengths: 340 mm, 700 mm All variants are only 3 mm thick when installed