Safety Guard MO3 for Large Grinding Machines

LED recessed luminaire TUBELED_40 II INTEGRATED - proven LED machine luminaire in the built-in version, suitable for all common installation shafts in machine tools. The integrated recessed luminaire has protection class IP67 / IP69K. It is made for harsh production environments and impresses with its enormous amount of light power and high light output. The emitted 100 ° area light is amplified with light forming technology in the direction where it is needed. The TUBELED_40 II Integrated recessed luminaire is 100% CNC suitable, because the built-in version of the TUBELED_40 II, with its robust housing and safety glass, is resistant to chip bombardment as well as coolants and lubricants.  Advantages: Bright and flicker-free illumination, without UV and IR components Generous lighting through 100 ° surface light Space-saving geometry: fits into common installation slots Easy and quick retrofitting of Machines High degree of protection IP67 / IP69K ON / OFF interface: load-free switching, flashing, flashing and dimming possible  Areas of application : Machine tools Woodworking machines Packaging machines Injection molding machines  Features: High-performance LED chips for daylight white 5200-5700 K Luminous flux-optimized light yield and flicker-free illumination without UV and IR components Beam angle 100 ° and good color rendering abe Ra> 85 Crack-proof, 4 mm thick ESG with opal white glare control Protection class IP67 / IP69K and above-average service life> 60,000h (L80 / B10) More direct Connection to machine or system voltage 24V DC via M12 plug connections Chip bulletproof, vibration and shock resistant - 100% CNC suitable Recessed luminaire for recess, sealed and screwed over cover Oil-resistant, sprayed-on seals Light Forming Technology for light guidance Heat dissipation via the rear profile - no burning in of coolants and lubricants CE and ETL listed test seals Maintenance-free, 36 months warranty Made in Germany  Versions: Panel width 74 mm in 4 Lengths: 220 mm, 395 mm, 570 mm, 745 mm Panel width 78 mm in 2 lengths: 340 mm, 700 mm All variants are only 3 mm thick when installed  

TUBELED_40 II LED machine light IP 67 / IP69K. The TUBELED_40 II is a machine light for rough production conditions and temperatures up to + 60 ° C. With a light diameter of only 40 mm, the slim machine light is an all-round talent - in terms of light output and possible applications. Available in 7 lengths and cascadable variants (can be linked electrically).  Advantages: Bright and flicker-free lighting, without UV and IR components Generous light exit area and 100 ° Area light Slim housing and various lengths Quick and easy equipping and retrofitting of machines and systems Temperature-resistant and splash-proof Height Degree of protection IP67 / IP69K Also for high ambient temperatures Electrically linked versions (cascadable) On / off interface. Load-free switching, flashing, flashing, dimming possible  Areas of application: Plastics processing Metal processing: micro-precision machines, eroding machines, stamping automation Woodworking with tight installation spaces  Features: High-performance LED chips for daylight white 5200-5700K - very bright beam angle 100 ° and good color rendering Ra> 85 protection class IP67 / IP69K and above-average service life> 60,000h (L80 / B10) crack-proof, 4 mm Strong ESG with opal white glare control Chip bulletproof, vibration and shock resistant - 100% CNC suitable Luminous flux-optimized power versions and performance-optimized ECO versions High total luminous flux, depending on the version Light-Forming-Technology Oil-resistant seals (FKM seal Vition®) Direct connection voltage 24V DC and cascading via M12 plug connections Practice heat dissipation r Aluminum extruded profile - no KSS burn-in CE - and ETL listed seal of approval Attachment via separately available accessories Maintenance-free, 36 months warranty Manufactured in Germany  Versions: 7 lengths: 190 mm, 280 mm, 365 mm, 540 mm, 715 mm, 1040 mm, 1540 mm 2 versions: Luminous flux-optimized power versions and power-optimized ECO versions Variants for electrical interlinking (cascadable)  

The LED system light UNILED SL RGB-W with signal function is a powerful system light which, in addition to balanced lighting, also offers a signal function for changing the light color or by flashing. The opal white glare control creates a homogeneous, glare-free and shadow-free illumination with a strong light output at the same time. Changes in status in the work area can be signaled by a color change, for example to green or red light or by intermittent flashing. Advantages: Homogeneous, low-shadow, glare-free illumination without UV and IR components Pleasant atmosphere thanks to daylight white 52005700K and signal function via different colors The white light reproduces colors and contrast values very well Opal white glare control for glare-free illumination Signaling via change of light color or intermittent flashing Integrated fastening straps Areas of application: Optical control workstations System workplaces Test and laboratory workplaces Color and lacquer tests Can be used in machines without coolant and chip bombardment Features: Robust aluminum housing with integrated fastening for horizontal use High-performance LED cluster with s Separate LED chips for white light and RGB Optionally also pivotable with wall or joint angles Bright illumination of system workstations and work areas with 5200-5700 K daylight white cover with opal white glare control Beam angle 100 ° and color rendering Ra> 85 in daylight white Signaling via change of light color - all colors of the RGB color space can be selected Protection class IP 50 and above-average service life> 60,000h (L80 / B10) Heat is dissipated to the rear via an aluminum base Connection voltage 24V DC via standardized M12 plug connection CE - and ETL listed seal of approval Maintenance-free, 36 months warranty Made in Germany Versions: Four different Lengths: 295 mm, 545 mm, 1045 mm, 1545 mm Different light intensities Opal white glare control

The MO2 model offers even more reliable spark and chip protection with a larger screen than the MO1. This protective device protects the milling machine operator from liquids, hot chips and rotating machine parts.  This grinding machine protection shield consists of a robust aluminium frame construction with friction clutch. The protective screen is optionally equipped with a 4 mm thick polycarbonate pane or a 6 mm robust safety glass pane. The umbrella is handy and can easily be retrofitted to your grinding machine. It is fastened with M6 screws (not included in the scope of delivery). Choose the model with integrated economical LED for optimum lighting.  Your advantages at a glance: - Protection against the ejection of material - Protection against collision with the grinding wheel - Drive cover (fixed or locked)   Scope of delivery: Protective screen in frame construction, optionally made of glass or polycarbonate, optionally with integrated LED lighting, installation instructions, CE declaration of conformity, optionally safety limit switch

The model MO1 offers reliable spark and chip protection. This protective device protects the milling machine operator from liquids, hot chips and rotating machine parts.   This grinding machine protection consists of a robust aluminium frame construction with friction clutch. The protective screen is equipped with a 4 mm thick polycarbonate screen. The umbrella is handy and can easily be retrofitted to your grinding machine. It is fastened with M6 screws (not included in the scope of delivery).  Scope of delivery: Protective screen in frame construction, installation instructions, CE declaration of conformity