Fixing Angle for Adjusting the Fastening of Drilling Machines Protective Devices - 2 pcs

Height-adjustable stable accident protection device on drilling machines with Polycarbonate screen. This interlocked drill guard is the optimum protection for your drilling machine. You have the choice between 1 and 2 screens made of highly resistant polycarbonate. If required, the protective device is also available without microswitch. When the locked protective guard moves, the IP67 microswitch opens and sends a stop signal to the machine control. This prevents the machine from running when the drill guard shield is open. To adapt the position of the protective screen quickly and easily to your conditions, we recommend our KSP bracket set.

These two angles help to better center and adjust the protective shield on drilling machine guards. In the illustration these angles are marked KSP3 and KSP4.

These four brackets help to better center and adjust the protective screen and the attachment to drilling machine guards. In the illustration these angles are marked KSP1, KSP2, KSP3 and KSP4.

The LED system light UNILED SL RGB-W with signal function is a powerful system light which, in addition to balanced lighting, also offers a signal function for changing the light color or by flashing. The opal white glare control creates a homogeneous, glare-free and shadow-free illumination with a strong light output at the same time. Changes in status in the work area can be signaled by a color change, for example to green or red light or by intermittent flashing. Advantages: Homogeneous, low-shadow, glare-free illumination without UV and IR components Pleasant atmosphere thanks to daylight white 52005700K and signal function via different colors The white light reproduces colors and contrast values very well Opal white glare control for glare-free illumination Signaling via change of light color or intermittent flashing Integrated fastening straps Areas of application: Optical control workstations System workplaces Test and laboratory workplaces Color and lacquer tests Can be used in machines without coolant and chip bombardment Features: Robust aluminum housing with integrated fastening for horizontal use High-performance LED cluster with s Separate LED chips for white light and RGB Optionally also pivotable with wall or joint angles Bright illumination of system workstations and work areas with 5200-5700 K daylight white cover with opal white glare control Beam angle 100 ° and color rendering Ra> 85 in daylight white Signaling via change of light color - all colors of the RGB color space can be selected Protection class IP 50 and above-average service life> 60,000h (L80 / B10) Heat is dissipated to the rear via an aluminum base Connection voltage 24V DC via standardized M12 plug connection CE - and ETL listed seal of approval Maintenance-free, 36 months warranty Made in Germany Versions: Four different Lengths: 295 mm, 545 mm, 1045 mm, 1545 mm Different light intensities Opal white glare control

Emergency stop boxes, suitable for a load up to 2.2 kW 3 phases or 5.5 A 1 phase.Three-phase motor start/stop with overload cut-off and automatic reset by push button or emergency stop switch.  Relay K7 directly switches the power to the load. The emergency stop box has generated its own 400 V AC transformer TM of 24 V AC. The output circuit is protected by a fuse. The emergency stop boxes and relay K7 are supplied with this auxiliary voltage. Control functions for low voltage (24V), management of safety microswitches installed on the machine button.  All emergency stop boxes ensure conscious switching on and off without automatic restart. The built-in LED indicates whether voltage is applied to the box and thus to the machine. The emergency stop as well as the start/stop can be integrated into the existing machine stop circuit or make it possible in the first place.  Dimensions: L 170 x W 118 x H 82 mmScope of supply: Pushbutton box, CE Declaration of Conformity