+49 8191 9151 19-50 info@mowotas.com
Go to homepage
€0.00*

Abrasive Belt Guide SPIDER for Finishing Workpieces

Skip image gallery

€1,224.00*

Prices excl. VAT plus shipping costs.
Duty-free for delivery to Switzerland and the UK.

Product number: 1165772
Product information "Abrasive Belt Guide SPIDER for Finishing Workpieces"

Our safety belt sander for lathes "Spider" for the finishing of workpieces ensures safety. Most accidents on lathes occur during regrinding, polishing and removal of burrs. Designed according to DIN EN 23125 standards 6.2.1 (no use of hands during working operations), your hands no longer come close to rotating machine parts.

Simple mounting

The grinding belt holder Spider is quickly mounted on the tool holder of the lathe and is immediately ready for use. The grinding belt guide is pressed against the workpiece with the carriage, the hands of the operator are far away from danger points. A manually operated crank allows the abrasive belt to be turned further when worn. This also happens outside the danger zones.

Note: the crank shown in the pictures only serves to transport the worn abrasive belt. The actual work is "done" by the tool slide.

Work Facilitation

By using the spider, you achieve a consistent sanding result. Depending on how close the tool slide comes to the workpiece, a uniform pressure is exerted on the workpiece to be machined. This is a tremendous improvement over the conventional and more dangerous manual method.

Spare part: Abrasive belts

Different belts (grain size, material) can be used according to your requirements. The belt can be changed quickly and easily: lift the lower tensioning spring, the abrasive belt relaxes and can be changed.

Scope of delivery:

Abrasive belt guide SPIDER in selected size, 3 abrasive belts in various grit sizes (grit 80 - 120 - 220), installation instructions, CE declaration of conformity

Installation Guide

Use on lathes

Use on lathes

Weight Approx. 2 kg

Weight Approx. 2 kg

Lighting No

Lighting No

Conformity according to manufacturer DIN EN23125 standards 6.2.1

Conformity according to manufacturer DIN EN23125 standards 6.2.1
Skip product gallery

We recommend matching this product:

Ersatzteil-Schleifband-Mowotas

Spare Part: Sanding Belt for SPIDER

Abrasive belt as spare part for our abrasive belt holders SPIDER50 and SPIDER75

€9.00*
Details
Details
Lathe Guard TF For Lathe Chucks

Lathe Guard TF For Lathe Chucks

This lathe guard TF protects the lathe operator from contact with the rotating chuck. At the same time, it also provides protection against hot chips, oil, coolant or any other type of flying parts that may be produced by machining a workpiece. Nevertheless, the shielding can be opened easily if you want to change the workpiece or chuck (For additional protection we recommend the gliding lathe guard Major or chip guard TC for front mounting or TC for rear mounting on the lathe.)  The robust steel construction and the impact-resistant, transparent protective screen made of a particularly high-quality plastic are resistant to mechanical and chemical influences. In addition, the protective device has a safety microswitch for additional safety. When the locked protective cover moves, the microswitch opens and sends a stop signal to the machine control. This prevents the machine from running when the screen is open.  The semicircular protective screen can be flexibly positioned on the holder. Let yourself be convinced by the simple assembly and adjustment.  If you like a model with a screen made of sheet steel with large polycarbonate viewing windows, please visit our model POL or our full metal hinged safety cover TFM.  For the selection of the optimum size of the lathe chuck guard, please also consider the dimension of any protruding clamping jaws. We also recommend a safety distance of approx. 100 mm.  Calculation example for the selection of the correct size: Spindle diameter 250 mm plus length of the protruding clamping jaws of 50 mm (this time two: left/right), plus safety distance 100 mm = 450 mm = TF450.You can find instructions for correct dimensioning of your lathe shields here.  Scope of delivery: Mounting with safety switch, protection cover in the selected diameter, installation instructions, CE declaration of conformity.  You can find more lathe guards here.

€351.00*
Details
Details
Interlocked Drill Guard TR2 Safety Device

Interlocked Drill Guard TR2 Safety Device

Height-adjustable stable accident protection device on drilling machines with Polycarbonate screen. This interlocked drill guard is the optimum protection for your drilling machine. You have the choice between 1 and 2 screens made of highly resistant polycarbonate. If required, the protective device is also available without microswitch. When the locked protective guard moves, the IP67 microswitch opens and sends a stop signal to the machine control. This prevents the machine from running when the drill guard shield is open. To adapt the position of the protective screen quickly and easily to your conditions, we recommend our KSP bracket set.

€255.00*
Details
Details

Technical Consulting

we are personally at your service

Customised products

specific for your needs

Pay upon invoice

for corporate customers from Germany, Austria and Switzerland.

Duty free

for deliveries to Switzerland and the UK

This website uses cookies to ensure the best experience possible. More information...