Spare Part: Protective Cover with Polycarbonate Plate for Safety Guard POL
Austauschelement für die Drehmaschinen-Schutzeinrichtung POL des Herstellers Repar2. Schutzhaube mit Scheibe aus Polycarbonat.
Nach den Vorgaben des Arbeitsschutzgesetzes (ArbSchG) und der Betriebssicherheitsverordnung (BetrSichV) müssen Polycarbonatscheiben regelmäßig auf sichtbare Schäden wie Risse oder Kratzer kontrolliert und bei Mängeln sofort ersetzt werden. Da eine Materialversprödung rein visuell nicht feststellbar ist, wird im Sinne der Betriebssicherheit ein vorsorglicher Austausch nach spätestens zwei Jahren dringend empfohlen.
Hinged Lathe Chuck Guard POL
With the POL lathe chuck guard you receive the same protection as with our lathe guard model TF or full metal model TFM, but with a screen made of sheet steel with large polycarbonate viewing windows. The POL protects the lathe operator from contact with the rotating chuck. In addition, hot chips, oil, coolant or any other type of flying parts are also repelled. Nevertheless, the shielding can easily be opened if you want to change the workpiece or chuck. For additional protection, we recommend the sliding lathe guard Major or chip guard TC for rear mounting on the lathe respectively chip guard TC for front mounting on the lathe. The robust steel construction of the POL lathe chuck guard is resistant to mechanical and chemical influences. In addition, the protective device has a safety microswitch for additional safety. When the locked protective cover moves, the microswitch opens and sends a stop signal to the machine control. This prevents the machine from running when the screen is open. The semicircular protective screen can be flexibly positioned on the holder. Let yourself be convinced by the simple assembly and adjustment. For the selection of the optimum size of the lathe chuck guard, please also consider the dimension of any protruding clamping jaws. We also recommend a safety distance of approx. 100 mm. Calculation example for the optimum size: Spindle diameter 250 mm plus length of the protruding clamping jaws of 50 mm (this dimension two times: left/right), plus safety distance 100 mm = 450 mm = POL450You can find instructions for correct dimensioning here. Scope of delivery:Mounting with safety switch, protective cover made of sheet steel and polycarbonate in the selected diameter, installation instructions, CE declaration of conformity