Emergency-Stop Pushbutton with Restart Protection Up To 7.5 kW Machine Output
Emergency stop boxes, suitable for a load up to 7.5 kW, 16.5 A, 3 phases, 40 V three-phase current.
Three-phase motor start/stop with overload cut-off and automatic reset by push button or emergency stop switch.
The power is switched through to the load via protection C1. The emergency stop box has generated its own 400 V AC transformer TM1 of 24 V AC. The input and output circuits are fused. This auxiliary voltage is used to supply the emergency stop box, relay R1 and protection C1. Low voltage (24V) control functions, management of safety microswitches installed on the machine button.
All emergency stop boxes ensure conscious switching on and off without automatic restart. The built-in LED indicates whether voltage is applied to the box and thus to the machine. The emergency stop as well as the start/stop can be integrated into the existing machine stop circuit or make it possible in the first place.
Dimensions: L 170 x W 118 x H 82 mm (pushbutton panel) L 200 x W 150 x H 150 mm (switch box)
Scope of supply: Emergency stop box and switch box, CE Declaration of Conformity
|
Use on |
any kind of machine tools |
|
Protection |
emergency off switch |
|
Maximum load |
7.5 kW - 3 phases, 16.5 A |
|
B10d-Value |
20.000.000 cycles |
|
Mounting dimensions |
200 mm x 118 mm x 82 mm |
|
Mounting Holes Bracket |
4 |
|
Lighting |
No |
|
Conformity according to manufacturer |
EN/ISO 13849-1 |