Accessories, Emergency Boxes

You need additional emergency-stop buttons, safety switches, spare parts (plates, protective screens, sanding belts etc.) or other accessories for your machine safety guard?

Spare Part for Lathe Guard TF: Protective Cover with Polycarbonate Plate

Application: Lathe machines Protection against: Chips, coolant Frame material: Steel frame Protective window: Polycarbonate Installation: Spare part for Lathe Guard TF Protection for: Lathe chuck Lighting: Without lighting

From £120.60*

Details

Emergency-Stop Pushbutton with Restart Protection Up To 2.2 kW Machine Output

Emergency stop boxes, suitable for a load up to 2.2 kW 3 phases or 5.5 A 1 phase.Three-phase motor start/stop with overload cut-off and automatic reset by push button or emergency stop switch. Relay K7 directly switches the power to the load. The emergency stop box has generated its own 400 V AC transformer TM of 24 V AC. The output circuit is protected by a fuse. The emergency stop boxes and relay K7 are supplied with this auxiliary voltage. Control functions for low voltage (24V), management of safety microswitches installed on the machine button. All emergency stop boxes ensure conscious switching on and off without automatic restart. The built-in LED indicates whether voltage is applied to the box and thus to the machine. The emergency stop as well as the start/stop can be integrated into the existing machine stop circuit or make it possible in the first place. Dimensions: L 170 x W 118 x H 82 mmScope of supply: Pushbutton box, CE Declaration of Conformity

£306.00*

Details

Spare Part: Polycarbonate Plate for Protective Cover (Models TF, PT, TR3B)

Thickness of polycarbonate window for 300 - 400 mm diameter of safety guard PT: 2 mmThickness of polycarbonate window for 450 - 600 mm diameter of safety guard PT: 3 mm The polycarbonate panel is sketched with the number 2 in the picture above.

From £38.70*

Details

Tip

Spare Part: Sanding Belt for SPIDER

Abrasive belt as spare part for our abrasive belt holders SPIDER50 and SPIDER75

From £8.10*

Details

Adapter for Safety Guard FAO

The adapter adapted to your machine is used together with the FAO movable locking guard. It is used on larger milling machines where the height of the FAO cap is not sufficient. Please also note the FAO dimensions in the download area. Application Milling machines Safety limit switch in protective cover FAO Material Aluminum Adapter height Customer specification Mounting Tool clamping

£235.35*

Details

Safety Switch for Safety Guard TOP (max. 3 pieces)

The safety switches are suitable for safety guards which must be closed to ensure the required operational safety.

Price on request

Details

Height-Adjustable Post (1,200 mm to 1,600 mm) for Safety Guard TOP

With the height-adjustable posts you bring the protective device into the correct height. This allows you to optimally adapt the protection to the conditions of your machine tool. Advantages at a glance:Safe position of your protective deviceeasy alignment of the post possibleAdjustability even on uneven surfacesflexible thanks to height adjustment

Price on request

Details

Spare Part: Protective Screen LL Flexible Arm with Magnetic Attachment 215 mm x 300 mm

Flexible protective cover made of scratch-resistant polycarbonate shade measuring 215 mm x 300 mm. The magnetic base allows quick and easy mounting. Individually adjustable due to the 350 mm long flexible arm.

£189.00*

Details

Spare Part: Protective Screen MSI - with Magnetic Mounting 350 mm x 300 mm

Flexible protective cover made of scratch-resistant polycarbonate screen measuring 350 mm x 300 mm with magnetic fastening that can be switched on and off.

£336.60*

Details

Protective cover RM - flexible arm, magnetic fixing, size: 230 mm x 300 mm

Spare Part: Protective Screen RM - Flexible Arm Magnetic Mounting 230 mm x 300 mm

Flexible protective cover made of scratch-resistant polycarbonate with the dimensions 230 mm x 300 mm. Mounting is quick and easy using the magnetic stand. Customizable Shield, individually adjustable by the 520 mm long flexible arm.

£189.00*

Details

Emergency-Stop Pushbutton with Restart Protection Up To 7.5 kW Machine Output

Emergency stop boxes, suitable for a load up to 7.5 kW, 16.5 A, 3 phases, 40 V three-phase current.Three-phase motor start/stop with overload cut-off and automatic reset by push button or emergency stop switch. The power is switched through to the load via protection C1. The emergency stop box has generated its own 400 V AC transformer TM1 of 24 V AC. The input and output circuits are fused. This auxiliary voltage is used to supply the emergency stop box, relay R1 and protection C1. Low voltage (24V) control functions, management of safety microswitches installed on the machine button. All emergency stop boxes ensure conscious switching on and off without automatic restart. The built-in LED indicates whether voltage is applied to the box and thus to the machine. The emergency stop as well as the start/stop can be integrated into the existing machine stop circuit or make it possible in the first place. Dimensions: L 170 x W 118 x H 82 mm (pushbutton panel) L 200 x W 150 x H 150 mm (switch box)Scope of supply: Emergency stop box and switch box, CE Declaration of Conformity

£495.00*

Details

Emergency-Stop Pushbutton with Restart Protection Up To 18 kW Machine Output

Emergency stop boxes with distribution box, suitable for a load up to 18 kW, 3 phases and 38 A.Three-phase motor start/stop with overload cut-off and automatic reset by push button or emergency stop switch. The power is switched through to the load via protection C1. The distribution box has generated its own 400 V AC transformer TM1 of 24 V AC. The input and output circuits are fused. This auxiliary voltage is used to supply the emergency stop box, relay R1 and protection C1. Control functions for low voltage (24V), management of safety microswitches installed on the machine button. All emergency stop boxes ensure conscious switching on and off without automatic restart. The built-in LED indicates whether voltage is applied to the box and thus to the machine. The emergency stop as well as the start/stop can be integrated into the existing machine stop circuit or make it possible in the first place. Dimensions: L 170 x W 118 x H 82 mm (pushbutton panel) L 200 x W 150 x H 150 mm (switch box)Scope of supply: Pushbutton box and switch box, CE Declaration of Conformity

£693.00*

Details

Switch Box for Terminated Opening of Safety Guards

With this control box you can define the period after which the doors are to be released for opening.

£558.00*

Details

Spare Part: Protective Cover with Polycarbonate Plate For Safety Guard PT

Thickness of polycarbonate window for 300 - 400 mm diameter of safety guard PT: 2 mmThickness of polycarbonate window for 450 - 600 mm diameter of safety guard PT: 3 mm Application Lathe machines Protection against Chips, coolant Frame material Steel frame Protective window Polycarbonate Mounting Spare part Protection Chuck Lighting without lighting

From £120.60*

Details

Spare Part: Protective Cover Completely Made Of Steel for Safety Guard TFM

Application Lathe machines Protection against Chips, coolant Material Solid metal Mounting Spare part Protection Chuck Lighting without lighting

From £241.20*

Details

Spare Part: Protective Cover with Polycarbonate Plate for Safety Guard POL

From £124.20*

Details

Spare Part: Steel Protective Cover with Polycarbonate Plate and Adapter for Safety Guard TR3B

Property Value Application Lathes Protection from Chips, coolant Frame material Steel frame Safety window Polycarbonate Installation Spare part Protection Chuck Lighting Without lighting

From £120.60*

Details

Accessories, Emergency Boxes

Filter products

Spare Part for Lathe Guard TF: Protective Cover with Polycarbonate Plate

Emergency-Stop Pushbutton with Restart Protection Up To 2.2 kW Machine Output

Spare Part: Polycarbonate Plate for Protective Cover (Models TF, PT, TR3B)

Spare Part: Sanding Belt for SPIDER

Adapter for Safety Guard FAO

Safety Switch for Safety Guard TOP (max. 3 pieces)

Height-Adjustable Post (1,200 mm to 1,600 mm) for Safety Guard TOP

Spare Part: Protective Screen LL Flexible Arm with Magnetic Attachment 215 mm x 300 mm

Spare Part: Protective Screen MSI - with Magnetic Mounting 350 mm x 300 mm

Spare Part: Protective Screen RM - Flexible Arm Magnetic Mounting 230 mm x 300 mm

Emergency-Stop Pushbutton with Restart Protection Up To 7.5 kW Machine Output

Emergency-Stop Pushbutton with Restart Protection Up To 18 kW Machine Output

Switch Box for Terminated Opening of Safety Guards

Spare Part: Protective Cover with Polycarbonate Plate For Safety Guard PT

Spare Part: Protective Cover Completely Made Of Steel for Safety Guard TFM

Spare Part: Protective Cover with Polycarbonate Plate for Safety Guard POL

Spare Part: Steel Protective Cover with Polycarbonate Plate and Adapter for Safety Guard TR3B

Technical Consulting

Customised products

Pay upon invoice

Duty free